- Thu Feb 27, 2014 2:54 pm
#33380
Hello Norm, My bike is a 2000 500 bullet. its been used as a trials bike so has no switches or wiring harness as such. It has the four wire alternator with two wires going to a boyer powerbox regulator. the amber and yellow were not wired at all but the small ac regulator is still fastened unwired to the frame. I was hoping to get some lights from the ac if possible using older type switch in the headlight and the handlebar dip. The bike is still going to be a trials but just with basic lighting no indicators etc. I started looking back last night through the forum and came across the debate on wiring the ac alternators. If I can get a basic set up for an mot I would be happy as the lights will only be emergency items. Thanks Dickie