Forum

[pomps]

i'm restoring a '60s Canterbury sidecar chassis,the one with the solid wheel.anyone know where i can purchase a new 3.25x16 tyre for it please? pretty sure it's the same chassis beezabryan has on his A.10.

[DonMc]

I had a Canterbury Carmobile on a Super Meteor some years ago. If I recall correctly (and it was a long time ago!)the solid wheel and tyre were the same size as Citroen 2CV.

Hope this helps

Don

[Mark M]

I just checked and the 2CV tyre appears to be a 15" so probably unsuitable but the same search throws up the Avon SM in 3.25 x 16 and it appears to be readily available.

REgards, Mark

[papasmurf]

Only one left:-
http://www.wheelhousetyres.co.uk/tyres/ ... ersal.html

[Beezabryan]

Hi Pomps, Canterbury it is. I think the current tyre is a Continentsl that some years back replaced an Avon.
I used what I could get at the time as I suspect you too will have to be doing.

[Beezabryan]

Might be worth looking a Mitas

[pomps]

ok thanks lads.think i'll go for a Mitas from Wheelhouse Tyres at £34.

[Mark M]

Pomps, I know someone who used a Mitas on a sidecar and found out it wore out very quickly, too soft a compound. While this would be ok on a solo, it didn't work on an outfit.

REgards, Mark

[Beezabryan]

Had heard good things of Mitas for solo use but if as Mark says too soft a compound for the thrashing a sidecar tyre gets then you'd best look elsewhere. Did I see Avon SM at 16" ? Will look later when more time available.

[papasmurf]

Personally if a 3.50x16 tyre would fit, I would use that size. More choice plus far heavier duty and higher weight limit plus more longevity.
(My Velorex sidecar has one fitted and I have only changed that once due to the amount of time it had been on the sidecar not because it wore out.)