- Wed Oct 07, 2020 6:33 pm
#93400
My exhaust and inlet timing cams have two shims each , should there be one each side of the cams or both between timing cover and cams ?
Forum
For Royal Enfield owners and enthusiasts
- Thu Oct 08, 2020 7:26 am
#93406
Both on the outside but i can't see that it would matter.
Classic C5 Euro 4 at the moment.
Also CBf250.
Also CBf250.
- Thu Oct 08, 2020 7:39 am
#93407
Thanks for reply , that was my thinking just making sure it didnt act like a thrust washer.
- Thu Oct 08, 2020 8:29 am
#93408
AFAIK they just take up the end play.
Just be careful what gasket you use; there are some thin ones about that will allow the cover to jam the cams regardless of the shims.
Just be careful what gasket you use; there are some thin ones about that will allow the cover to jam the cams regardless of the shims.
Classic C5 Euro 4 at the moment.
Also CBf250.
Also CBf250.
Shop for accessories at Hitchcocks Motorcycles