Forum

[oldgit61]

I fitted a Givi screen to my 500 efi Bullet but I have a problem.

I can turn the key just, but it is putting a lot of pressure on the ignition switch

[Daiwiskers]

Not familiar with the Givi screen but can you swap the mounts left and right so they are behind the bars
Difficult without seeing it Dai

[oldgit61]

Unfortunately they don't fit the other way either.

[Daiwiskers]

Only way I can see to do it is to cut the black section
Hopefully someone else will have a better idea

Take care Dai
Edit

Still not much room there must be a better way

[Rattlebattle]

If you bought it specifically for this bike I'd sent it back; it's not fit for purpose. Other screens fit ok.

[oldgit61]

Made a new bracket, so it clears the key (just).

Supplied bracket top, my bracket bottom.

[mart]

would it work if you swapped the brackets over? ie move the left bracket in your picture to the right side and vice versa.