Forum

[ric]

Grunt,
have you checked how the swinging arm is sitting up at the front end? On my non ABS enfield the clearance between the swinging arm bolt and the holes it passes through in the frame aren’t the tightest of tolerances allowing a lot of adjustment up at the wheel spindle end.

[Grunt]

stinkwheel - thanks - what a simple, idiot proof method - if only I'd known about it before assembly! (interesting monica by the way)
Mark and co. - Motoliner in Maidstone sound like my port of call - thanks
papasmurf - OK - good luck with the "something I would not detail to anyone" I'll be sure to Google it?