- Thu Mar 01, 2018 10:40 pm
#74513
Hello SB,
I fitted 3.5 x19 Ensign's to my 500 bullet a couple of years ago. I rate them highly. Some say they don't handle well, I disagree.
You will have to raise front mudguard a little, I made a couple of extender brackets, works well.
I had to cut 4inches off rear mudguard but it was behind number plate so looks fine.
Good luck
I fitted 3.5 x19 Ensign's to my 500 bullet a couple of years ago. I rate them highly. Some say they don't handle well, I disagree.
You will have to raise front mudguard a little, I made a couple of extender brackets, works well.
I had to cut 4inches off rear mudguard but it was behind number plate so looks fine.
Good luck