Forum

[Alan R]

and here's a video with moving pictures LOL----------

[Martin]

Thanxs,Alan,being the one who actually delivered a spoke video,
and not a litany of negative weary bleeting by many naysayers here.
Breezy video is enough for me to attempt again spokeing a 21" rim on
a B50 6" conical hub. currently stalled with every fourth spoke
protudeing about 1/2" up. Obviously I laced it wrong first time.

[papasmurf]

It isn't a case of naysayers, unless you have at the very least centres to put the hub in and a disl gauge, plus and expert living nearby I personally with decades of practical engineered experience would not attempt to respoke a wheel without being shown how to do it by an expert and a youtube video is not an expert at your side.

[neddy]

Only one thing to say, if you are not happy to do any type of work on a machine like these then buy "Jap" and save money and time, and for some of the so called "experienced" people on this site, I would chose carefully from who I take advise

[Alan R]

I'm fairly certain that Central Wheels had posted a video showing every aspect of building, measuring off-set, balancing etc but I can't find it at the moment..........Meanwhile take a look at this}------------

https://www.youtube.com/watch?v=oRYEv2NDdzE