Forum

[mart]

Hi the Indian Bullet manual I have states 28-30mm and Hictchcocks tech artical says 24-26mm for the VM28 float ht. - which is correct please? ta

[Alan R]

Hi MART---------I set mine to the Hitchcocks 24 - 28 and the bike starts and runs well enough...( Bullet '65 )....The 28-30 seems a bit on the high side to me but, you could always resort to those if you find that the lower figures aren't working for you...........Remember to make sure all your other settings are correct as well.......

[mart]

thanks Alan - do you measure it from the gasket face or the lip ?

[Paul M H]

http://www.hitchcocksmotorcycles.com/vi ... orumorder=
Hi see this previous thread it contains some useful information on measuring carb settings.

[mart]

thanks