This Forum is now CLOSED use the link to get more details viewtopic.php?f=4&t=13925
By simon
#63039
Obviously not a purists mount but it did seem to get along ok. What were your impressions of its top speed and general usability? I do remeber a contributor to this forum in the past who was a great fan but I have to admitt that Id personally struggle with the sound it makes.
User avatar
By Leon Novello
#63041
What a horrible racket, I hope you had ear plugs. That sounded like and ancient 1900`s motorcycle on its last legs, or a bucket of ball bearings rolling down an iron roof. As far as I`m concerned, mileage is not worth the noise one has to suffer, the petrol engines are bad enough. It`s a shame the Romans didn`t stay longer to sort out those narrow single-lane goat tracks where two cars can`t pass without one having to dive into the hedges. I only stayed with it to look at the scenery. My ears are still ringing.
#63042
My impressions were ... it was SLOW. Imagine a 350 Bullet in need of a rebore and also with burnt valves and a blowing head gasket and you'd be about on a par performance wise. I don't know if they are all like this, but this one was going flat out from 5 mins, 40 sec in the video and again doing a more or less standing start from 12 mins, 18 sec. It was a harsh ride, but to be fair, the suspension was not great [very stiff] on this machine.
Regards, Paul.
By jefrs
#63560
Leon, welcome to english country lanes. A "lane" is quite literally a cow-path, a road designed by cattle, long droves or simply getting the beasts to and from pasture. Roman roads although straight were built for single ox-cart width of 4-ft 8.1/2-in (which we used for rail tracks). Lanes are fun but you do have to mind that you don't end up as a bonnet mascot on a Range Rover.
User avatar
By Scalyback
#63561

The roman road going north from London was 66 feet wide and designed for 4 lanes of traffic!

(pipe and smoke it)

User avatar
By PeteF
#63562
The Ox cart was the origin of 4'81/2" rail gauge only because that width was used on the early, pre locomotive, rail systems which used horse drawn carts on rails.
Whether there was a standard for Ox carts before there was a need for one is open to arguement. Personally I think not. I think every maker would have his own measurement. There were no national designs for horse drawn vehicles but each area's design was based on the local requirements.
User avatar
By Leon Novello
#63563
Until recently; Australia had three rail gauges, 3ft 6in, 4ft 8 1/2in and 5ft 2in; passengers had to change trains at the borders. The Romans don`t know what they started. I think we are wandering a bit off the topic here, now, about electric trains---------------------.

Shop for accessories at Hitchcocks Motorcycles