Forum

[Lennie]

Does anyone know if these are available for the Bullet 500 Classic? Mine seems to get through steel exhausts at an alarming rate, I use mine as a regular commuter (through winter and Salty roads)I have replaced the exhaust more times than any other component.

[neddy]

You can get them made

[Adrian]

Our hosts have Motad stainless silencers for the EFI (which I'm assuming your 500 classic is), though if you had the CGT you could buy a complete system from off the shelf. But you can indeed get them made, try PGW Engineering 07518 023911 for a downpipe and/or silencer, I've seen their stainless exhausts at a couple of shows and they looked pretty good. A.

[papasmurf]

I haver several times had bespoke stainless exhaust systems made, in the case of old Japanese machines they are far cheaper than a manufacturers replacement.

[tobyker]

Since our hosts do not list a stainless exhaust for the 350 Classic, I went to see Meerkat in Kilbirnie, who have done a very nice job.

[PeteF]

Allden Exhausts, Market Rasen do a good job. They like to have the whole bike there so they can fit the system properly.

[Lennie]

Thanks for the replies guys some good leads there, PeteF I will try the Market Rasen company...... That's about 10 miles from me, and I'd not heard of them, thanks.