Forum

[Norm]

Does anybody know the width of the inner distance piece that goes between the 2 bearings on the drive side of a Bullet. I need to make one fairly quickly and the one I have is badly worn and I can't wait to get one from O/S. If nobody knows, does anybody know the thickness of one of the circlips that hold the drive side bearings in place. I can work it out if I know how thick they are. I can't believe I don't have any of these lying around here

[Alan R]

Norm-------send an e-mail to the lads in Mr H's workshops--- they'll know, surely ??

[Norm]

Thanks Alan, didn't want to bother Jo with something so simple but I guess I will have to

[Wayne]

Hi,

Circlip - 1.94 mm
Inner spacer - 8.22 mm
Outer spacer - 5.63 mm

Hope this helps...

[zippy]

Hi norm. which Bullet is this? my circlip 2.02mm / Outer spacer thickness 11.14mm / cant find the inner spacer...Engine is a'54 bullet

[Norm]

Thanks Wayne and Zippy, all good Richard emailed me with the info, thanks again. Zippy it is for an early nineties Indian Bullet