Forum

[mole]

Hi I am having problems with my gt/ crusader getting neutral ( I cant at all when the engine is running) is this a common fault on these and if so is there anything I can do about it. it is the 4 speed. I have stripped the box twice but cant see anything wrong. all other gears are working well
regards mole

[Alan R]

Sounds like clutch drag---Check and re-check your clutch running clearances-------Clutch cable stretching ??--------

[Mark M]

Mole, you could also look at the article titled 250 Engine Rebuild in Technical Notes, it will give good advice about setting up the selectors which is critical on these engines.
REgards, Mark

[mole]

hi thanks for the info
regards mole