Electric start removal on Sixty-5

Reply

Electric start removal on Sixty-5#2406

By Sixty-5 Endevour - Tue Jul 09, 2013 9:25 pm

- Tue Jul 09, 2013 9:25 pm #2406

Hi Folks

Does anyone know where I might be able to find a Kickstart only inner primary case which is designed for 5-speed left shift bikes for sale ??

I want to remove my electric start and clean the lines up at the same time

Thanks Endevour

Electric start removal on Sixty-5#26402

By Alan R - Tue Jul 09, 2013 9:30 pm

- Tue Jul 09, 2013 9:30 pm #26402

Hi guys-----------In the current cat. try page 49, Item No.90152

Electric start removal on Sixty-5#26406

By Sixty-5 Endevour - Tue Jul 09, 2013 9:40 pm

- Tue Jul 09, 2013 9:40 pm #26406

Thanks for the swift reply !!! are there are any other mods I should do whilst I am getting this done ??

Electric start removal on Sixty-5#26431

By Norm - Wed Jul 10, 2013 8:19 pm

- Wed Jul 10, 2013 8:19 pm #26431

Remember you will have to drill and tap the crankcase to take the new inner primary

Electric start removal on Sixty-5#26444

By Alan R - Wed Jul 10, 2013 10:31 pm

- Wed Jul 10, 2013 10:31 pm #26444

Hi guys----------Tell as many as you can that there IS LIFE after the spragg has gone..have you dumped the PAV system (including the filter-in-the-toolbox ) ??? If keeping the MIKCARB then jet up as per RIGGERS and pop a 19T---- YES A 19 Tooth sprocket ( fitting an 18 is just a waste of time for an ordinary touring road bike) to free-up a few more horses in the engine.... Have a look at the condition of the fork shrouds..The original "65" ones were plastic and will be starting to crack by now....Has the front brake linkage mod been done ??----------That should keep you busy for a bit ----------------