This Forum is now CLOSED use the link to get more details viewtopic.php?f=3&t=13924#p102587
By jfw
#2368
This is probably been done to death but I have to ask. Replaced the oil in my chain case last weekend. Used ATF I had kicking around, I can't remember the brand I used but man is the bike noisey now!

Do people use ATF or is there a better fluid for in there?

By neddy
#26219
Use ATF, find it fine, by all acounts its the stuff to use.
By Barry_Q
#26220
I use ATF in my Lightning. If you don't like the noise that comes out of the primary chaincase, fit the chain tensioner that has the rubber tip on it. It really enhances the clatter from the valve gear!
By Frank
#26221
I'm not convinced in the benefits of using ATF in anything other than an auto box but an increase in noise is not one of the drawbacks that I've encountered. Is there something else amiss in the chaincase?
By Alan R
#26226
Hi guys--------- have ATF in both Bullet 500's for some time now---- no "Extra" noises found..Was this just a straight "Drain and re-fill" or have you done something else along the way ??
By jfw
#26232
thanks people,
it was just a straight drain and refill. Perhaps the onset of noise and the change of primary case oil were just a coincidence. I'm not even sure it is the Chain case that is the source but I leaned that way given the recent activity on my part. Maybe I filled it less then had been in it before.

I'm going to have to take it for a spin tomorrow and see if I can't put my finger on the source but it's a Roar that gives me a bad feeling. I'll let you know

Shop for accessories at Hitchcocks Motorcycles