- Thu May 23, 2013 1:09 pm
#2211
I have just discovered that the black paint on the central rib inside my petrol tank (2000 Classic 500) has started to peel off (there appears to be red oxide primer underneath, which seems to be ok). I assume that this is happening now due to the increased percentage of alcohol in unleaded petrol. Obviously this needs to be dealt with soon, in case a large bit of paint blocks the fuel supply, and the obvious answer is to apply tank sealant(which I've done on a BSA before but the problem inside that tank was surface rust only, not paint!). Two questions - are any others having the same problem, and does anyone have any good ideas for removing the paint, given that you can't see or reach most of the interior of the tank, other than the usual 'paraffin and bolts' method?