Forum

[nicknick109]

Trial Handlebars.
Wish to fit the above bars to a standard 350 Bullet. Looking at the catalogue Mr.H advises that they will fit with standard cables. My question is do the cables follow the same routing or do they have to be re- routed or will it be obvious when fitting ?
Thanks any help.
Nick

[PeteF]

his might help http://www.whfolk.co.uk/REOCHUMBER/Articles/hbars.htm

[Alan R]

Hello NICKNICK 109---------- here's mine fitted to a 2005 Classic 500-----they go straight on as advertised !! >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -----------

[nicknick109]

To Pete F and Alan R both answers real helpful so many thanks to both of you and seasons wishes to you both.
Nick

[Craig]

Hi Folk's

I am a bit late in on this one, But Just to confirm... I have fitted these bars to Both 500's & Classic 350's & My still in use 98 STD 350... All Have Been straight swops With NO Real Problems at all.
And I Have Found them Very Comfy & Good in daily use....Recommended.

Regards To You all... Craig

[grunda 12]

hi alan, have you got the part number for these bars i might put a pair on G13 atb paul.

[Alan R]

Hi Paul------------93051 I think.... They list 2 types of braced bars, mine are the straight or "in-line" type whereas the others are bent back at the ends.