- Tue Aug 07, 2012 12:47 pm
#952
All, having done the regular check that all nuts are tight on Bertie I have written a list on spanners and other tools used and what I carry in my tool bag, I thought it might be useful to others, these should be enough to get you out of most troubles...................................................................................................................... Front hub, brake side 25mm , Speedo side 24mm - Front brake 17mm, 10mm, 8mm - Front mudguard 13mm - Engine mounts 13mm - Primary chain 18mm, 11mm - Front Foot rest 17mm - Rear brake pedal 15mm - Rear foot rest 18mm - Rear 15/16" - hub Rear wheel 18mm - Rear brake lever 18mm - Rear brake adjuster 13mm - Chain guard 13mm - Rear shocks 17mm - Seat posts 14mm - Army bars 12mm - Kick start 13mm - Amal carb inlet manifold 14mm, carb 13mm, carb cable adjustments 8mm - Exhaust 21mm, 14mm, 13mm - Petrol tank 15mm - Clutch adjuster lock nut 17/32" socket - Also found some 13mm are a bit loose, 1/2" works well on these .......................... Among other tools are some box spanners, a double ended screw driver, a stubby screw driver with various ends, feeler gauge, pliers, gaffa tape (in case a bracket breaks), Stanley knife, spare cables......................Im sure there are other handy bits that ive missed, please add to the list if you can think of any.........................regards....Just enjoy the ride.