This Forum is now CLOSED use the link to get more details viewtopic.php?f=3&t=13924#p102587
By Howzie
#880
Hi all,

Took the old 59 250cc clipper out for a good run on Tuesday afternoon up country, done 85 miles all told and it never missed a beat (thank god), put a couple of spanners etc in the toolbox next to the ignition coil and when I returned home I removed them and what a surprise I had when a touched the coil! boy was it hot round about 34/36 degrees C.

I did expect it to be warm of course, but under the impression that these coils where oil filled to help cooling.

Is this normal for my 6volt system.

Cheers.

By Les H
#15255
With air temperatures around 30 celsius and the coil in the wake of a very hot engine, I would say the coil was running pretty cooly...certainly nothing to worry about.

Shop for accessories at Hitchcocks Motorcycles