This Forum is now CLOSED use the link to get more details viewtopic.php?f=3&t=13924#p102587
By wolf
#1018
hi guys, i want to put the carb on my 2008 electra x back to standard, as it came from the factory. at present its been rejetted to suit a non standrad exhaust. this was done before i bought the bike and im sure its not been done properly, so basicaly i want to go back to the original carb setup and will put the original exhaust that came with the bike back on. what size are the original jets please. many thanks. wolf.
By Dampking
#16342
Stock Electra X came with 115 mainjet and 15 pilot. But it's better if you have a bigger mainjet and needle raised, that is in last notch. Running it a bit richer than normal is good. Usually all these Lean Burn models run superb lean. A rich bike will always be cooler than a lean bike.

Shop for accessories at Hitchcocks Motorcycles