By Rich Smith
#84822
Hi. My name is Rich Smith

I live near Stow on the Wold with a 2012 Electra EFI. Its one that Watsonian had turned into a 'Trials' model...and has been completely trouble free until now. I bought it 18 months ago with 35 miles on the clock. It had been carefully stored for the previous five years.
My apologies if this subject has been raised before but I am in need of advice.
Over the last few weeks it had got increasingly unwilling to start on the button and then failed to respond to kicking.
A new relay (the one near the postive terminal, under the saddle) got the pump making the right noises as I turned the ignition on. Replaced the pump too as this was a bit clonky and indifferent, even when directly wired. Having stuck it back together, its still not starting. Pulled the fuel pipe off the plastic spout on the underside of the pump assembly, turned the key, pressed the button-no fuel! Have checked as many connections and plugs as I can find. Whipped off side stand cut out switch and thumbed the plunger, this got a bit of a crackle from the relays in that silver pod thing on nearside.
I therefore ask if anyone out there has any sage advice. Hey ho...!
Thank you in advance.
Rich.
User avatar
By Boxerman
#84881
Crackling relays makes me think of electrical faults too, but I'll relate a problem that had me head scratching for months.
Mine is a 2009 Electra EFI. It would start fine, tickover OK and rev up in neutral OK ish, but on the road it would bog down, cut out and do all sorts of unpleasant things.
As a last desperate attempt at diagnosis, I checked the fuel pressure and found it to be 18psi and not the 40+ psi it should be.
On stripping down the pump [again] I found that the spring in the pressure regulator had apparently rusted through and broken.
I've modified the regulator with a small setscrew, nut and spring so it now gives 40psi and [fingers crossed] the bike is running fine.

Frank
User avatar
By Boxerman
#84882
Check the 3 fuse holders too, mine had become slack on the fuses and giving intermittent connection. [Thought I'd found the issue there, but it wasn't the main one]
Just unplug the sidestand switch to disable it.

Frank
By Rich Smith
#84896
Thanks for your replies folks-there's enough there to get stuck into. Yes, the pump makes that winding up noise when the ignition is turned on-about 5 seconds of hopefulness but no fuel makes it out past the pump. I get the impression that despite renewing that little relay above the battery and sort of under the nearside nose of the saddle, there is some other electrical component which has an influence on fuel delivery.

Now its stopped raining I want to get out there!

Thank you, I'm off delving again.

Rich.

Shop for accessories at Hitchcocks Motorcycles