- Mon Apr 11, 2016 5:26 pm
#6150
Can anyone please confirm that the thread on the spring stud that sticks out of the bottom of the fork slider is 9/16" cycle thread. Bike is Electra EFI 2011
Need to install new seals and guess what - the Indians glue the stud into the slider with some sort of sealant therefore the slider is difficult to remove. Did it in the end but needed to make a drift to fit up the stud hole which meant that I had to remove both complete fork legs to do it. Ho Hum !! Need to clean the threads up now.
Need to install new seals and guess what - the Indians glue the stud into the slider with some sort of sealant therefore the slider is difficult to remove. Did it in the end but needed to make a drift to fit up the stud hole which meant that I had to remove both complete fork legs to do it. Ho Hum !! Need to clean the threads up now.