By Alan Codger
#91159
Hi. I lost a part ( hex nut) probably due to the vibrations of my EFI B5 Standard 2017 and I find hard to get the right part off the Parts Book Online were I can only detect a Hex Nut with size M10 1.5 but that look metric to me and the bar measure half inch in dia? I manage to find ( im in Italy ) a 1/2 UFC Nut but it does not fit .. Any help? Thanks https://postimg.cc/bsh4ssqr
By mart
#91163
12mm? measure the diameter with verniers and measure the pitch with a thread gauge, then you will know exactly what you have.
By Alan Codger
#91164
mart wrote:
Wed Jul 01, 2020 7:19 am
12mm? measure the diameter with verniers and measure the pitch with a thread gauge, then you will know exactly what you have.
Thanks, I think I managed to find the part to be HEX 1/2 CEI ( 26tpi ..?)
User avatar
By Wheaters
#91166
Yes, some parts of my Indian Home market 350 have a cycle thread, which is very slightly different to metric.
The rear seat fixing studs and nuts are one example of 26 tpi threads.

Just to catch the unwary and make things more difficult, I reckon....can’t think of any other reason, most things on my bike seem to have metric threads.
By Daiwiskers
#91167
I think you need part number

110365

And also washer part number

586037

A phone call or email to our hosts will be a good idea to make sure

7/16 thread

Think I got it right
By Daiwiskers
#91176
I don't know for sure!

But hopefully someone here will know
By Daiwiskers
#91178
I thought the picture was the pillion footrest bracket mount

Hopefully someone else will know for sure

Shop for accessories at Hitchcocks Motorcycles