- Wed Jan 26, 2022 9:40 pm
#99831
I have year 2000 350 bullet , and I am my confused over the 2 position ignition switch when reading the schematic.
The drawing show one normally open contact in off position and one normally closed contact ?
My drawing shows red/ black wire to black is open circuit when the ignition switch is in the ON position, is this correct?
Your help would be appreciated, cheers ng
The drawing show one normally open contact in off position and one normally closed contact ?
My drawing shows red/ black wire to black is open circuit when the ignition switch is in the ON position, is this correct?
Your help would be appreciated, cheers ng