- Sun Aug 02, 2020 10:39 am
#91911
Hello, fellow Himalayan owners. I think I have a problem with a parasitic draw of my Himalayan 2018. The problem seems to be in the Recharging circuit (this houses the RR unit). Even when the bike is completely off, this circuit draws 3.3 mA, as seen on the picture. I'm not completely sure, but the circuit shouldn't draw anything, it should read 0 mA. Can somebody help me, and check what kind of draw is on your Himalayan?
The measurement is easy. Just grab your multimeter, and set it on mA (direct current). With the bike off, open the fuse box, and remove the bottom 25A white fuse (it's called F1 fuse in manual). Measure the exposed contacts in the fuse box (polarity doesn't matter). Exactly like I measured it on the picture. What kind of mA reading do you get? Thanks for the help!
The measurement is easy. Just grab your multimeter, and set it on mA (direct current). With the bike off, open the fuse box, and remove the bottom 25A white fuse (it's called F1 fuse in manual). Measure the exposed contacts in the fuse box (polarity doesn't matter). Exactly like I measured it on the picture. What kind of mA reading do you get? Thanks for the help!
Attachments
20200802_112431.jpg (844.92 KiB) Viewed 2674 times