1947 350G project FS
Posted: Sat Mar 14, 2015 5:28 pm
1947 350G - matching frame / engine No's.
Two previous owners - I'm the third.
Piston and rings replaced.
Valves and guides replaced.
oil pump cleaned out and discs bedded in.
Mag re-built.
Monoblock rebuilt.
New exhaust down pipe.
No dyno, (uses new battery charged for up to 12hrs of lights per charge)
New seat.
Starts 2nd kick (with fresh oil, but
Problems still existing:
Oil still getting into the combustion chamber (re-bore??)
Engine oil evacuating out the end of the crank (drive side) filling the primary case(crank seals??)
So if anyone's interested just get in touch with a sensible offer and of course any questions, failing that she will be mothballed until I get space and time.
Dave 07787 562 016. Glos.
Two previous owners - I'm the third.
Piston and rings replaced.
Valves and guides replaced.
oil pump cleaned out and discs bedded in.
Mag re-built.
Monoblock rebuilt.
New exhaust down pipe.
No dyno, (uses new battery charged for up to 12hrs of lights per charge)
New seat.
Starts 2nd kick (with fresh oil, but
Problems still existing:
Oil still getting into the combustion chamber (re-bore??)
Engine oil evacuating out the end of the crank (drive side) filling the primary case(crank seals??)
So if anyone's interested just get in touch with a sensible offer and of course any questions, failing that she will be mothballed until I get space and time.
Dave 07787 562 016. Glos.