Forum

[guru]

FOR SALE: bought the bike as a project number of years ago sinse then , Engine: all top end work & new components fitted. Bottom end ie - clutch / oil pump / seals. All electrical parts replaced ie loom, switches ect. Wheels s/s spokes - bearings, sprockets - front & rear, tyres tubes. Head set. have all original nuts, bolts & spindles with all replace with s/s. Engine is in frame with centre stand fitted, all chrome parts been re-chromed - kick start / g/leaver, head steady / valanced mudguards. New exhaust system and Hagon shocks still boxed, Basically all which can be upgraded or renewed has been with a new 2 pack paint job. An Ideal project for someone its just waiting to be put together and to enjoy the ride. Costs for bike and all parts (from HM) is 3/1.2 K, sell for £1500. I don't think I've left anything of the list, but i probably have done.

[posthouwer]

Hi guru, assuming you still have the bike could you send me a couple of pic's.
It sounds like a pile of parts - have you ever had it running ?
Can you send me your email address, although I think this is frowned upon on the forum ?
Cheers,
Alan

[Rushour]

Hi - Whereabouts in the country are you ?

[posthouwer]

Forget it !!

[guru]

ALAN: paul@paulhoughton.co.uk
Rushour: warrington north cheshire

[guru]

FOR SALE: 1966 Crusader Sports with unique reg number of RBF 9D. In response to an earlier request for a photo, this Crusader photo is: NOT the one for sale but is a great image of the same model bike, the one I have for sale is the identical model. Earlier was asked if the bike ever worked, YES when first bought it, I rode it the 20+mls home before deciding to do a full nut n bolt restoration job, engine is currently in the frame & with partial rebuild (purpose was to re-place & upgrade any worn parts - unleaded conversion top end ect, no broken fins all sound, bottom end seals, oil pump, clutch, engine sprocket replaced) New head set & fork springs. All paint work re done (black powder coated, any parts in red are professionally repainted with gold hand painted pin stripes down tank) all chrome parts been re-chromed (kick start, gear leaver, head steady, chain guard, mud guards) Wheels re built in s/s with new bearings, sprockets, tyres / tubes, Up dated electrics (harness, horn, switches, diodes, amp ect) Seat same as in photo been re-upholstered, choice of two sets of new bars, has its original alloy leavers, new head lite rim and sealed beam unit, 95% of parts are there most have been upgraded or replaced due to being not up to standard. Most fastenings are in S/S but have used original ones where can. Have all invoices for parts from HM, £1350 ovno. (All spares available from HM). Location - Warrington, Cheshire.I think i have covered everything but are welcome to get back to me, please dont expect me to return your email straight away as i may be working away at the time.

[500Goldstar]

Hi did you sell the Crusader

[Shot2nothing]

Yes, he did. To me!

[LanesExplorer]

Perhaps you might like to give us progress reports (with photos) of the completion of the project if you have time? Good luck with getting it up and running.