Page 1 of 1
RE 500 racing at Mallory on board footage
Posted: Mon Apr 20, 2015 7:22 am
by Bullet Whisperer
Hi All, just over a week ago we were racing at Mallory with the VMCC. Ian put a camera on the 500 and these three short films go together to show one race - the first lap is rather sedate, as it is the sighting lap before the start. Enjoy it - I think he did! Cheers, Paul.
https://www.youtube.com/watch?v=aNXvIywoKcE
https://www.youtube.com/watch?v=kZj6TKw8SdA
https://www.youtube.com/watch?v=z0A4OvYRAOQ
RE 500 racing at Mallory on board footage
Posted: Mon Apr 20, 2015 7:46 am
by papasmurf
7000 revs I am impressed.
RE 500 racing at Mallory on board footage
Posted: Mon Apr 20, 2015 9:56 am
by simon
Dang that's exhilarating! That sounds superb. That's your shortened stroke squish banded 500 motor is it? What a beast.
RE 500 racing at Mallory on board footage
Posted: Mon Apr 20, 2015 10:07 am
by Bullet Whisperer
Not short stroked - I have kept to the 84x90 mm dimensions of the 500 Bullet, but with a permissible over bore of 0.060", crank and piston to our spec, four main bearings and high ratio rockers and valves from the U.S. 8000rpm + can be reached. The 350 also uses the standard 70x90 dimensions, with maximum overbore as above, but with a short conrod and crank to our spec and can go to close to 9000 rpm. A short stroke 350 engine is nearing completion at present. They all have squish heads! Cheers, Paul.
RE 500 racing at Mallory on board footage
Posted: Tue Apr 21, 2015 8:53 pm
by Les
[center]
RE 500 racing at Mallory on board footage
Posted: Tue Apr 21, 2015 8:56 pm
by Les
[center]
RE 500 racing at Mallory on board footage
Posted: Tue Apr 21, 2015 9:19 pm
by Scalyback
YAY! Let the bastard rip!
RE 500 racing at Mallory on board footage
Posted: Tue Apr 21, 2015 9:55 pm
by Adrian
Of course you can have all three clips playing at once for maximum noise. A.