Page 1 of 1
Just needs a tree fungus seat and some exhaust wrap to finish!
Posted: Sat Apr 03, 2021 7:38 pm
by Bullet Whisperer
Re: Just needs a tree fungus seat and some exhaust wrap to finish!
Posted: Sat Apr 03, 2021 7:58 pm
by stinkwheel
I's more complete and structurally sound than 90% of the "bobber" projects out there.
You'll probably be able to remove most of that welding with a couple of sharp blows with a chipping hammer. It's probably actually glued to the frame with flux more than welded.
Re: Just needs a tree fungus seat and some exhaust wrap to finish!
Posted: Sat Apr 03, 2021 8:00 pm
by Andy C
Just a bit of light surface rust - soon rub off with a bit of emery cloth
Re: Just needs a tree fungus seat and some exhaust wrap to finish!
Posted: Tue Apr 13, 2021 8:25 am
by Allanfox
I worked as a welder for many years and when I was training apprentices this quality of weld always got a look up to the sky, "what are you looking for?" answer "For the Pidgeon that did this!!"
As agricultural engineers we used to go around farms and a good percentage was repairing the damage from what the farmer had attempted with welding set, looks like one of them has moved to custom bike building!