Hitchcocks Forum

Posted: **Mon Aug 05, 2019 2:21 pm**

Hi
Some Bullet centre stand brackets are with NO provision (spring posts) for attaching the springs.
How do we manage to get the springs attached to them then ? Do the springs attach to another place ?
Thanks

Posted: **Mon Aug 05, 2019 4:06 pm**

Hi, earlier bullets stands have one spring on the right which is attached to a bracket mounted on the top two gearbox bolts. Vince

Posted: **Mon Aug 05, 2019 6:40 pm**

Same as on the 60's Redditch twins then. Thanks. I will be welding an attachment post on the stand to suit. Safe riding !

Posted: **Mon Aug 05, 2019 6:50 pm**

Could you not simply drill the plates and use a nut and bolt as a "post"?

Hitchcocks Forum

Centre stand springs fitting when no springs posts on plates

Centre stand springs fitting when no springs posts on plates

Re: Centre stand springs fitting when no springs posts on plates

Re: Centre stand springs fitting when no springs posts on plates

Re: Centre stand springs fitting when no springs posts on plates