- Thu Jul 04, 2019 9:12 pm
#83934
I have been busy preparing the bike ( 1998 500 Bullet) for it's MOT test, my method is to start at the front and work back, I haven't got past the steering head yet. Not a lot was tight, the 'wedge' that locks the bearing adjuster is missing, (on order).
My problem is, what I thought was play in the steering , turned out to be play in the front brake backplate, where it 'dovetails' onto the fork leg.
Anything missing that shims it up? or is this normal? will I need to devise a repair?
My problem is, what I thought was play in the steering , turned out to be play in the front brake backplate, where it 'dovetails' onto the fork leg.
Anything missing that shims it up? or is this normal? will I need to devise a repair?