- Sun Jun 16, 2019 6:59 pm
#83578
Does anyone have any problems seeing the oil level on the disptick? - mine is the round variety with the two marks for high and low ad I can never quite make out the oil level.
Simple solution - and that was to replace the round stick with one made from a piece of steel strip about 3mm wide X 0.8mm thick marked with the high / low marks copied from the round stick.
No problem seeing the oil level with this type of stick, in fact I can now see that I have over filled it
The 3mm x 0.8mm steel was from a piece that has been coiled up in the garage for years - thought it would come in useful one day/
Simple solution - and that was to replace the round stick with one made from a piece of steel strip about 3mm wide X 0.8mm thick marked with the high / low marks copied from the round stick.
No problem seeing the oil level with this type of stick, in fact I can now see that I have over filled it
The 3mm x 0.8mm steel was from a piece that has been coiled up in the garage for years - thought it would come in useful one day/
Previous bikes - far too many !!