Page 1 of 1

primary chain adjustment

Posted: Thu Jun 13, 2019 11:37 am
by Slappy
Good afternoon all

Just a quick question I have got the primary case off at the moment and in the work shop manual it states that the chain should have 1/4 inch free play on the top run

is this adjustment correct or does it need to be more, when I first checked it was about 3/4 inch, I did think 1/4 seemed a bit tight

many thanks Dave.

Re: primary chain adjustment

Posted: Thu Jun 13, 2019 3:09 pm
by vince
Hi, 1/4 is correct. ie rotate the primary chain slowly and find tightest point. Bear in mind even wishbone tight you will still be able to move it . So it's a loose 1/4 !! Vince.

Re: primary chain adjustment

Posted: Fri Jun 14, 2019 8:45 am
by Slappy
Thanks Vince