Hitchcocks Forum

I have an Enfield India 350 Bullet but don't know what year it is. I have been looking at the online catalogues for identifying some of the parts.
The clutch centre looks to be from a rigid 1954 350 bullet because it has cush rubbers in it. There is a oil prssure relief valve on the motor.
I have found some strange things when I overhauled the motor, there was a burnt exhaust valve so I purchases some new valves and now can't put the lash caps on because the push rods are too long.
I left the lash caps off and shimmed the rocker boxes to get some clearance., do enfield have different length pushrods available.
Hope someone can shed some light.

Look in Accessory Catalogue/Engine/Crankcase and Timing Side. Lots of different pushrods there.

It would help to know the age of the engine. Can you post a link to pictures of the bike? (You can't actually post them here.) And we need the engine numbers, you will find these on the left side (facing forward) of the engine below the front of the cylinder barrel.
REgards, Mark

There are three numbers on the engine and frame,
B1079162C, EI69916, and 41801.
The wheels are single side brakes. The speedo drives off the rear wheel, non QD wheel.