Page 1 of 1
turbo twin
Posted: Tue Aug 21, 2018 9:33 am
by 250 4t
Hi can anyone tell me the correct length of rear shocks for a turbo twin .Also have a wiring loom to fit and any help on headlight switch connections would be gratefully appreciated ,i do have wiring diagram but colours are slightly different .
Thanks .
turbo twin
Posted: Tue Aug 21, 2018 9:42 am
by Mark M
Not sure I understand, you 'have a wiring loom to fit' or are you making one? If you have one already the lighting switch should have a plug on it if you have the original set up?
REgards, Mark
turbo twin
Posted: Tue Aug 21, 2018 11:37 am
by 250 4t
Hi Mark i got a new wiring harness from our hosts and ththere is no plug on it for lighting switch .
Thanks Ian
turbo twin
Posted: Tue Aug 21, 2018 12:26 pm
by Mark M
Ian, you can buy them on Ebay, here is one complete with cables which might suit you best: item number 323352059472. Or you can just buy the socket, item number 253225801956.
REgards, Mark
turbo twin
Posted: Tue Aug 21, 2018 4:57 pm
by 250 4t
Hi Mark thanks for the info I have the socket it was more to see which wires go into what terminals on the switch. Thanks again .
RE gardsIan