Page 1 of 1
Exhaust down pipe
Posted: Tue Jul 17, 2018 3:28 pm
by MickB
Hi all, does anyone know the torque setting for tightening the downpipe to the cylinder head please? I've looked in the service manual but there seems to be no mention of it. Many thanks in advance.
Exhaust down pipe
Posted: Tue Jul 17, 2018 3:53 pm
by Presto
The nuts are tightened to approx 18 lbs/ft [25 Nm]
Exhaust down pipe
Posted: Tue Jul 17, 2018 3:59 pm
by Presto
CORRECTION! Those figures are for studs. NUTS torque up to about 6 lbs/ft.
Exhaust down pipe
Posted: Tue Jul 17, 2018 7:54 pm
by MickB
Thanks Presto, I will be using two copper gaskets and don't want to distort them.