Forum

[Davedup]

Hi folks, what's the correct procedure for adjusting the neutral finding lever?
Mind doesn't quite go into neutral.

Thanks
Dave

[Mark M]

Dave, first of all (apologies if you know this,) the neutral finder only works from 2nd to 4th, it won't work from 1st. What I do when setting it up is put the gearbox in neutral, loosen the locking bolt and rotate the cam until it just lifts the lever, then lock the bolt. Try it in use, you may have to drop the adjustment cam slightly to get it just right.

REgards, Mark

[Davedup]

Thanks Mark, will give that a go.
I hadn't realised it didn't operate from first either!

Many thanks
Dave