Forum

[Tomshayes]

Hi All

Reassembling 500 Bullet classic engine and cylinder head I noticed that 4 of the Rocker mounting bolts are black and 4 are bright finished... Is this for ant particular reason and do they need to go anywhere in particular or does it not matter?

REgards Tom

[Tim NZ]

There is no reference in the Wshop manual for the orientation of the rocker studs...


The Black 'ground' studs are fitted diametrically opposite the pushrod - valve


eg: on the exhaust they are fitted left-rear & right-front


Inlet rocker block left-front & right-rear.

[Tomshayes]

Thanks Tim.