Albion 4spd box
Posted: Mon Oct 09, 2017 10:38 am
by scotty
Has anyone any clues on setting gear selector plate. I can get 1st neutral then straight to 3rd and top.does the selector plate adjust the two btm gears one way and two higher gears the other way or could i have the spring loaded chisel point indent screwed in a bit too far, old one was pretty knackerd when i removed it and yes notched gear selector plate is in right way round.
Albion 4spd box
Posted: Mon Oct 09, 2017 1:25 pm
by stinkwheel
Our hosts have a fantastic guide to the workings of the Albion gearbox on theri website.
If you download it rather than open it in a web browser (so save it and open in adobe or similar) it animates itself as you scroll up and down.
http://www.hitchcocksmotorcycles.com/pi ... 020415.pdf
Albion 4spd box
Posted: Mon Oct 09, 2017 3:09 pm
by vince
Hi, a quick check can you select 2nd gear with the neutral finder? If the answer is yes and it stays in gear, the problem is in the selector mechanism. Vince