Hitchcocks Forum

can anyone tell me what thread is used on a 1994 Bullet fuel tap? where it screws into the tank thanks

Seems to be a Karcoma tap with an adaptor for that year, the thread in the actual tank was 1/4" BSP for many years which gives you plenty of options for a replacement. For the female thread on the tap itself, 12mm x 1.00mm rings a bell from an ebay reference somewhere, but our hosts still list the adaptors as well as the taps.



http://www.hitchcocksmotorcycles.com/pa ... etrol_Tank



A.

thanks- I need to clean up the thread in the tank itself. so was wondering what tap to buy