Hitchcocks Forum

Posted: **Tue Apr 18, 2017 8:00 am**

Any of you blokes in the electric business know if 12v led stop tail globes will work on 6v, trying to get one for a 6v trailbike .

Posted: **Tue Apr 18, 2017 8:39 am**

HI Mate,
try vehicle wiring products,
on 0115 9305 5454.
they sell all kinds of led lamps.

Posted: **Tue Apr 18, 2017 8:52 am**

Try my mate Pete at www.dynamoregulatorconversions.com he has LED in all shapes sizes and polarity free and much better quality!

REgards, Mark

Posted: **Tue Apr 18, 2017 9:30 am**

+1 for Pete, knows his bike electrics and a nice guy as well.

Posted: **Tue Apr 18, 2017 9:57 am**

Can't think why they wouldn't work in a 6v system. However, I have bought a few LED stop/tail bulbs for my GT as I was fed up with it blowing conventional bulbs, all of them didn't have much difference in brightness between tail and stop. They all came from ebay and weren't E marked. I eventually fitted an LED lightboard which is much better.

Posted: **Tue Apr 18, 2017 2:08 pm**

YAY, Pete's the man, he'll do 6v 12v flashing bulbs, allsorts.

Posted: **Sat Apr 29, 2017 12:20 pm**

I too have fitted led bulbs to both my bikes and so far so good. I have idea if the stop light is brighter than the tail lamp though I guess I will find out when I take it for it's next Mot.
But I am wondering about these led light boards mentioned above, could someone kindly enlighten me?

Posted: **Sat Apr 29, 2017 3:52 pm**

If my attempt at posting a photo has worked, this is my light board.

Posted: **Sat Apr 29, 2017 4:41 pm**

Try this:

Posted: **Sat Apr 29, 2017 4:43 pm**

[center]