Page 1 of 1
Fork leg removal
Posted: Mon Feb 08, 2016 10:48 am
by Nettshubby
Hi all, i need to replace the fork gaiters on my 2003 Sixty5. I seem to remember someone writing that the later fork legs DONT screw into the casqette, like the early ones I used to have. Is this so, or am I having another Seniour Moment again?!
Fork leg removal
Posted: Mon Feb 08, 2016 10:53 am
by another Allan
I believe you are correct, but I don't know the changeover date. Why not just remove the chrome screws from the casquette ans see if there is an internal hexagon on the top of the fork stanchions? Then you will know if they screw out or not. If they doe, please remember to screw clockwise to loosen.....
Fork leg removal
Posted: Mon Feb 08, 2016 10:54 am
by another Allan
'doe'shoudl be 'do'.... dohhhh!
Fork leg removal
Posted: Mon Feb 08, 2016 10:55 am
by another Allan
and 'shoudl' should be 'should'.... I'll get my coat............
Fork leg removal
Posted: Mon Feb 08, 2016 10:56 am
by another Allan
did you refer to 'senior moments?.....................
Fork leg removal
Posted: Mon Feb 08, 2016 12:47 pm
by PeteF
I'm pretty sure they screw in.
Fork leg removal
Posted: Mon Feb 08, 2016 2:21 pm
by mauri
yes, they are of the screw in type.
Fork leg removal
Posted: Mon Feb 08, 2016 3:50 pm
by Nettshubby
Right, well that's sorted that then! 😉