Fork problem
Posted: Mon Oct 19, 2015 12:40 pm
Afternoon all,
Hoping someone can shed some light on this for me. Just changed my fork seals (2007 iron head), re-filled with oil etc. but was unable to put the threaded cap back on the top of one of the legs. On closer Inspection, the fork leg isn't lining up with the hole in the casquette, so preventing the cap from screwing into the fork.
I've removed and refitted the fork leg again, just to make sure its going in right, and it certainly seems to be - screws in without a problem. Am I missing something?
Hoping someone can shed some light on this for me. Just changed my fork seals (2007 iron head), re-filled with oil etc. but was unable to put the threaded cap back on the top of one of the legs. On closer Inspection, the fork leg isn't lining up with the hole in the casquette, so preventing the cap from screwing into the fork.
I've removed and refitted the fork leg again, just to make sure its going in right, and it certainly seems to be - screws in without a problem. Am I missing something?