350 carb jets
Posted: Wed Dec 17, 2014 4:58 pm
Hi, My 2001 350 bullet is fitted with a swept back pipe and " Goldie " silencer, Any advice on jetting the standard carb please ?
Hitchcocks Forum
The official message boards of Hitchcocks Motorcycles
https://messageboard.hitchcocksmotorcycles.com/
350 carb jets
https://messageboard.hitchcocksmotorcycles.com/viewtopic.php?f=3&t=4535
Page 1 of 1
350 carb jets
Posted: Wed Dec 17, 2014 5:53 pm
Depends on your air filter.
350 carb jets
Posted: Wed Dec 17, 2014 7:03 pm
Its the standard in tool-box type, I was thinking of fitting a gauze type and doing away with the oe one.
350 carb jets
Posted: Wed Dec 17, 2014 8:27 pm
Hi Chris, if you have 2014 catalogue go to page 18 jetting guide worked for me on1991 5oo bullet with a mikcarb cheers Phil merry Xmas every one
350 carb jets
Posted: Wed Dec 17, 2014 10:09 pm
As Stainer says, it's in the catalogue. You'll not get the best out of the exhaust system with the standard air filter. There will always be some bottle neck in any system. If you free up the exhaust then the filter is the bottle neck. If you then free up the filter it'll be the inlet and exhaust ports. If you free up the ports it'll be the carb. Etc etc etc.
350 carb jets
Posted: Thu Dec 18, 2014 12:36 pm
Cheers Lads, thanks for that 