Page 1 of 1
2008 Bullet 350 classic front brake
Posted: Thu Nov 20, 2014 4:46 pm
by pellow60
I've just dismantled my twin leading shoe front brake to clean and regrease as described in our hosts technical article and noticed that I didn't have a spacer between the brake plate and the hub. Is this correct for this model. ( It's the last of the 4 speed kick start classics)
2008 Bullet 350 classic front brake
Posted: Thu Nov 20, 2014 6:51 pm
by Mark M
Parts book on this site suggests you should have one. REgards, Mark
2008 Bullet 350 classic front brake
Posted: Fri Nov 21, 2014 9:19 am
by pellow60
The brake plate sits ok on the hub and spins easily. There is just a thin washer on the felt washer over the bearing retainer.