change headlamp to British Pre Focus?
Posted: Mon Oct 13, 2014 4:12 pm
[center]
British pre focus headlamps
I want to change my Iron bullet's headlamp (again)!
He came with an asymmetric...

Assymetric headlamp, pic taken before we had even met in the flesh!
Then I changed to our hosts Neolite with the Philips motorvision bulb...

Very bright, but Tornado's charging circuit failed to handle it...
So I swapped to led day running lamp...

but it is not usable at night as it is not dippable!
But having looked at the old bikes at the Hollyville, I WANT a nice Lucas looking British pre focus lamp like the one our hosts do, or a secondhand original if it will fit? I assume that any 7 inch headlamp shell; old or new; will fit a bullet?.

Some of the 'Hollyville' bikes...

The 'hungry looking' BSA

Same BSA

nice Triumph
I know the lamp will fit in a 1994 bullet, but the trouble is that I am not sure where to get the bayonet connector that goes on the back of the bulb, as my bullets wiring has the 1/4 inch spade terminals that fit both the asymmetric and H4 lamps, but not the pre focus. Our Hosts don't seem to list one, but as they say, only about 10% of their stuff is listed, so maybe I should call them?
Has anybody else fitted a curry Enfield with a British pre focus unit? Was it the expected straight forward job of connecting/soldering/heat-shrinking the bayonet connector to the existing wiring? Did the headlamp itself just fit straight in, or were there any unforeseen problems?
P.S. I don;t have a working pilot light in the headlamp shell, as Tornado seems to lack the wiring for it, so that is not a concern.

British pre focus headlamps
I want to change my Iron bullet's headlamp (again)!
He came with an asymmetric...

Assymetric headlamp, pic taken before we had even met in the flesh!
Then I changed to our hosts Neolite with the Philips motorvision bulb...

Very bright, but Tornado's charging circuit failed to handle it...
So I swapped to led day running lamp...

but it is not usable at night as it is not dippable!
But having looked at the old bikes at the Hollyville, I WANT a nice Lucas looking British pre focus lamp like the one our hosts do, or a secondhand original if it will fit? I assume that any 7 inch headlamp shell; old or new; will fit a bullet?.

Some of the 'Hollyville' bikes...

The 'hungry looking' BSA

Same BSA

nice Triumph
I know the lamp will fit in a 1994 bullet, but the trouble is that I am not sure where to get the bayonet connector that goes on the back of the bulb, as my bullets wiring has the 1/4 inch spade terminals that fit both the asymmetric and H4 lamps, but not the pre focus. Our Hosts don't seem to list one, but as they say, only about 10% of their stuff is listed, so maybe I should call them?
Has anybody else fitted a curry Enfield with a British pre focus unit? Was it the expected straight forward job of connecting/soldering/heat-shrinking the bayonet connector to the existing wiring? Did the headlamp itself just fit straight in, or were there any unforeseen problems?
P.S. I don;t have a working pilot light in the headlamp shell, as Tornado seems to lack the wiring for it, so that is not a concern.
