Page 1 of 1
bullet 500
Posted: Thu Jul 10, 2014 6:06 pm
by bikerp
Hi all,went to kick my bullet up today and kickstart not engaging,as in not turning the engine over.Anyone any ideas?Thanks.
bullet 500
Posted: Thu Jul 10, 2014 6:34 pm
by Bertie the Bullet
I'm no expert in the inner workings of the gearbox but first thing i would check is that the clutch isn't jammed in the 'lever pulled' position if you get my drift, as this will disengage the gearbox from the engine.. good luck sorting there problem.
bullet 500
Posted: Thu Jul 10, 2014 6:41 pm
by dennis t c
When I had this problem it was the pawl in the gear box, it took two hours to fix by a R E specialist mechanic
bullet 500
Posted: Thu Jul 10, 2014 6:44 pm
by Paul M H
If its not engaging at all with just no resistance its probably just the kick-start pawl & small spring needs replacing not too hard job parts available as a kit on this site.
bullet 500
Posted: Thu Jul 10, 2014 7:48 pm
by Paul M H