Page 1 of 1
torque for gearbox fixing stud nut
Posted: Wed Mar 19, 2014 8:34 pm
by JTL
Hi all... can someone help me out with torque setting for the nut (# 140302) for the gearbox fixing top stud? And what is this little thing just below the rear mudguard bracket (# 801027) on the back side of the gearbox? It looks like a small pressure valve with a little bit of grease coming out of it... all the best Jacob PS I will try to upload a pix of this if I can
torque for gearbox fixing stud nut
Posted: Wed Mar 19, 2014 8:42 pm
by JTL
maybe this works... Jacob
torque for gearbox fixing stud nut
Posted: Wed Mar 19, 2014 8:47 pm
by JTL
Well, it did not really work, but with some patience it is possible to to copy the url and view the images on my photobucket account
torque for gearbox fixing stud nut
Posted: Wed Mar 19, 2014 11:06 pm
by Leon Novello
JTL: If the picture is on Photobucket(if not, put it on there) copy it using the HTML link from the menu on the right.
torque for gearbox fixing stud nut
Posted: Thu Mar 20, 2014 4:46 pm
by Midge
It holds the selector fork that is inside. A for nut torque, just nip it up not too tight.
torque for gearbox fixing stud nut
Posted: Thu Mar 20, 2014 7:39 pm
by JTL
Leon... the pictures are all on Photobucket, but I guess I have just picked the wrong copy/link buttom. Thanks for naming the right buttom. Gwilly, I believe you found the right one. Thanks a lot for both uploading the picture and your answer. The reason I thought it was a sort of pressure valve, was because of the grease coming out of the little gizmo. Mystery solve. Next question is, if it is ok to cover it with a new bracket (no pressure added), I'm doing for a battery box (I'm re-locating the battery)... Jacob
torque for gearbox fixing stud nut
Posted: Thu Mar 20, 2014 7:41 pm
by JTL
Sorry Midge, name confusion after a long day at work.
