Page 1 of 2
MAGURA FRONT BRAKE
Posted: Mon Mar 17, 2014 11:25 am
by Johnny
MAGURA FRONT BRAKE LEVER - INDIAN MADE 500 CC BULLET (1991) I recently and stupidly dropped my ENFIELD 500 cc BULLET breaking the MAGURA front brake lever. They are a discontinued line and I've been struggling to find a replacement. Can any one help? The part number is MAGURA - 141678
MAGURA FRONT BRAKE
Posted: Mon Mar 17, 2014 5:21 pm
by loco builder bri
Short answer No.Unless you can find a bike being broken up for spares, they have been unavailable for some time. The good news is Hitchcocks sell a kit to change to another manufacturer. Not cheap but an option for you, check it out in the catalogue.
Best regards Bri e
MAGURA FRONT BRAKE
Posted: Mon Mar 17, 2014 6:06 pm
by loco builder bri
Just looked it up a 2012 cataloque Magura to Minda conversion Brake Side Part Number 92557 £52 Includes:-
Brake lever assembly - Throttle rotor & rubber - Brake light switch - Brake & Throttle cable.Looks value for money to me?
Best Regards Bri e
MAGURA FRONT BRAKE
Posted: Mon Mar 17, 2014 6:17 pm
by Beezabryan
Add 20% Vodka And Tonic £10.40 plus P&P bumps it up a bit
MAGURA FRONT BRAKE
Posted: Fri Mar 21, 2014 5:30 pm
by loco builder bri
Propably a lesson for all of us with this post? Suspect we have all had a bike fall over & damage something whilst being manoeuvred. I for one will get a spare brake & clutch lever straight away for the next bike i buy before riding it away from the dealers.Let us know how you get on. Is it beyond welding?
MAGURA FRONT BRAKE
Posted: Fri Mar 21, 2014 6:04 pm
by Midge
There's no point trying to keep it Magura unless originallity is particularly important. Get the Minda conversion and be done with it. Its a better lever anyway.
MAGURA FRONT BRAKE
Posted: Fri Mar 21, 2014 6:10 pm
by Norm
Midge how do you do a Minda conversion? it requires a lot of wiring alterations from what I know
MAGURA FRONT BRAKE
Posted: Sat Mar 22, 2014 11:03 am
by loco builder bri
A 1991 bullet will have all bullet connectors so its just a matter of unplugging the old cables & replugging the new. There is only the brake light switch (2 wires)on the r/h handlebar anyway.Google Magura to Minda conversion.Maybe Hitchcocks would be prepared to accept Johnny's undamaged Magura clutch side controls to sell to someone that has broken their Magura l/h controls?
Regards Bri e
MAGURA FRONT BRAKE
Posted: Sat Mar 22, 2014 12:17 pm
by Jonesy
HiJonny,Try the dealers inIndia go on line and give it a try best of luck
MAGURA FRONT BRAKE
Posted: Sun Mar 23, 2014 12:06 am
by Norm
Loco, inside the headlight in most of those early bikes is usually a total rats nest of bodged up wires that make me shudder every time I pull a headlight out, something to avoid if at all possible