Page 1 of 1

Rounds badly and vibrations

Posted: Mon Apr 09, 2012 9:09 am
by Sergio
Hi guys, sine Ive done a service my 2009 electra efi has started to round not as it used to' do before the service. i tell you what I did: i changed the oil with a synthetic 15/50 castrol, I polisce the air filter and I changed the oli filter making sure to' fit it properly and last I changed the spark with one reccomended for the efi models ( a bosh esactly the same with the original). Sine then first I had some oli ejected f rom the ejecting tube and the engine dose not round so smoothly and regular as before. Has anybody of you had the same isuues or has any suggestion to give me.
Confused really... Thanks in avance

Rounds badly and vibrations

Posted: Mon Apr 09, 2012 10:33 am
by Paul M H
Try replacing the original Plug again first just to rule out the new plugs not defective it can happen and check you have not pulled the HT lead out from the cap or coil slightly check there still secully fitted.. Not sure what you mean you done to the Air Filter the best way of cleaning is to just blow it though with compresed Air to clean it. If too dirty replace it with a new one

Rounds badly and vibrations

Posted: Mon Apr 09, 2012 10:59 am
by Sergio
Thanks Paul, yes Ive already replaced the original plag and the airfilter has been cleaned with compressed air (it is new it was changed at 2000 miles and now im only 4400 miles).im sorry but I dont understand what you mean with HT lead.
Thank you very mach Paul and forgive my english.

Rounds badly and vibrations

Posted: Mon Apr 09, 2012 6:16 pm
by Riggers
Sergio - the 'HT' lead is the one connected to the Spark Plug. Check that it is clipped onto the plug properly. Also check the other end of the same lead and make sure it is securely fitted to the ignition coil.

Cheers

Riggers

Rounds badly and vibrations

Posted: Tue Apr 10, 2012 8:42 am
by Sergio
Ok, I got it! just wanted to' make it sure,. Thank you so much.