Page 1 of 1
gt/crusader gears
Posted: Fri Nov 22, 2013 4:18 pm
by mole
Hi I am having problems with my gt/ crusader getting neutral ( I cant at all when the engine is running) is this a common fault on these and if so is there anything I can do about it. it is the 4 speed. I have stripped the box twice but cant see anything wrong. all other gears are working well
regards mole
gt/crusader gears
Posted: Fri Nov 22, 2013 6:47 pm
by Alan R
Sounds like clutch drag---Check and re-check your clutch running clearances-------Clutch cable stretching ??--------
gt/crusader gears
Posted: Sat Nov 23, 2013 2:09 pm
by Mark M
Mole, you could also look at the article titled 250 Engine Rebuild in Technical Notes, it will give good advice about setting up the selectors which is critical on these engines.
REgards, Mark
gt/crusader gears
Posted: Sun Nov 24, 2013 9:04 pm
by mole
hi thanks for the info
regards mole